What does a good cutting/grinding blade look like?

Important tools used in technician work various construction works called grinding stones or grinding machines Which technicians are popularly called piglets. There are many sizes, such as a 4-inch grinding stone, 7-inch grinding stone, and a 9-inch grinding stone. The grinding stone is composed of 2 parts: the handle part is a position for the hand to hold. use connect to wires There is a switch for on-off. including controlling the strength of the machine and the motor part, which is connected to circular, flat and thin cutting or grinding discs. The blade rotates according to the wattage of the machine. To have enough speed for grinding or cutting various construction materials such as wood, steel, galvanized steel, stainless steel, PVC, ceramic tile, stone, fiber cement board. It is also used to decorate the surface of the material.

Here we are going to talk about the compact, lightweight 4-inch grinding wheel that works well in tight spaces. which can be used in a variety of ways according to the characteristics of the leaves used are

– Grinding discs for grinders It is a thicker blade than general cutting blades. Usually about 4 mm thick. Used to remove excess parts. But the work that has come out is quite rough and not very elaborate.

Grinding wheel 4 inch Sumo (15 pieces)

– Steel cutting blades for grinders a thin cutting blade Able to cut carbon steel, stainless steel, aluminium, copper, available in various designs depending on the blade material, blade thickness, single-layer or double-layer fibers.
– Wood cutting blades for grinders Looks like a general hacksaw blade is a blade with teeth. which will have both rough teeth (less number of saw teeth) and fine teeth (High number of saw teeth) If using fine teeth, cutting will not cause the wood to break. Gets smoother cuts, no burn marks, but cuts slowly and consumes the saw’s force. If you use coarse teeth, you can cut wood faster. But the resulting cuts are quite rough. The selection of fine tooth or coarse tooth blades must be selected according to the type of wood and the nature of the workpiece to be cut.

– Cement cutting blades, tile cutting blades for grinding machines There are many styles The first type is the toothed blade. very popular Suitable for cutting stone and concrete. that require speed of cutting But the work that comes out will be rough. The second type is the tooth blade. There are more grooves for wet milling than the groove teeth. Makes cutting work more and faster. The third type is a smooth tooth blade. When used, the cut will be smooth and beautiful. Suitable for work that requires beauty, such as cutting marble, granite and tile. The cutting speed depends on the quality of the diamond used to make the cutting blade.

Leave a Reply

Your email address will not be published. Required fields are marked *